亚洲成a人片在线观看www-国内精品伊人久久久久av影院-精品www日韩熟女人妻-成人乱码一区二区三区av-熟妇人妻无乱码中文字幕真矢织江

濟南誠耐金屬制品有限公司

濟南誠耐金屬制品有限公司

不斷發展技術力量、完善的設計服務團隊,真誠為您提供的服務

咨詢熱線
于經理15194166167
15990909037

聯系我們

企業名稱:濟南誠耐金屬制品有限公司

聯系人:于經理

電話: 15990909037

電話: 15194166167

地址:山東省濟南市歷城區小清河南路8288號

當前位置:首頁 »資訊中心 » 新聞資訊山東不銹鋼玻璃門:不銹鋼玻璃門如何調節門縫間隙?

山東不銹鋼玻璃門:不銹鋼玻璃門如何調節門縫間隙?

來源:http://m.59xiaohaha.cn/ 瀏覽:0發表時間:2024-05-07

  不銹鋼玻璃門如何調節門縫間隙?

  How to adjust the gap between stainless steel glass doors?

  調節不銹鋼玻璃門的門縫間隙,可以采取以下步驟:

  To adjust the gap between stainless steel glass doors, the following steps can be taken:

  1.檢查螺絲:,檢查玻璃門上的螺絲是否松動。如果螺絲松動,擰緊螺絲即可。

  1. Check the screws: First, check if the screws on the glass door are loose. If the screws are loose, tighten them.

  2.調整玻璃門位置:如果螺絲沒有松動,可能是因為玻璃門因重力下垂導致左右縫隙不均。這時,需要重新調整玻璃門的位置。卸下固定玻璃門的螺絲,調整玻璃門高度使左右縫隙均勻,并確保門與地面保持一定距離。調整合適后,用螺絲刀擰緊螺絲并重新固定玻璃門。

  2. Adjust the position of the glass door: If the screws are not loose, it may be because the glass door sags due to gravity, causing uneven gaps on the left and right. At this point, it is necessary to readjust the position of the glass door. Remove the screws that fix the glass door, adjust the height of the glass door to make the left and right gaps even, and ensure that the door maintains a certain distance from the ground. After adjusting properly, tighten the screws with a screwdriver and re secure the glass door.

  3.調節地彈簧:檢查玻璃門的地彈簧松緊度。地彈簧太緊或太松都可能導致玻璃門失去平衡,出現左右縫隙不均的情況。根據實際情況適當放松或收緊地彈簧。

  3. Adjust the ground spring: Check the tightness of the ground spring on the glass door. If the ground spring is too tight or too loose, it may cause the glass door to lose balance and result in uneven gaps on the left and right. Relax or tighten the ground spring appropriately according to the actual situation.

20210219015751941.jpg

  4.體調節方法:

  4. Body adjustment methods:

  如果玻璃門上部交叉處相撞,可以將上夾具往玻璃門中心方向移動,然后擰緊螺絲。

  If there is a collision at the intersection of the upper part of the glass door, the upper fixture can be moved towards the center of the glass door, and then the screws can be tightened.

  如果玻璃門下部相撞,則將上述方法往相反方向調整。

  If the lower part of the glass door collides, adjust the above method in the opposite direction.

  調節地彈簧時,打開蓋板,調整螺絲以控制關門速度和角度。

  When adjusting the ground spring, open the cover plate and adjust the screws to control the closing speed and angle.

  通過以上步驟,可以有效調節不銹鋼玻璃門的門縫間隙,確保門的正常開啟和關閉。

  By following the above steps, the gap between the stainless steel glass doors can be effectively adjusted to ensure the normal opening and closing of the door.

  本文由山東不銹鋼玻璃門友情奉獻。更多有關的知識請點 擊:http://m.59xiaohaha.cn真誠的態度為您提供為的服務,更多有關的知識我 們將會陸續向大家奉獻,敬請期待。

  This article is a friendly contribution from Shandong stainless steel glass doors. For more information, please click on: http://m.59xiaohaha.cn Sincere attitude will provide you with excellent service, and we will gradually contribute more relevant knowledge to everyone. Stay tuned.